Standards IEEE Std. 802.3™ 100BASE-FX, 100BASE-TX 

Fiber Optic Connector Specs	Single Mode Min TX PWR: -15.0 dBm
	Max TX PWR: -8.0 dBm
	RX Sensitivity: -31.0 dBm
	Max In PWR: -8.0 dBm
	Link Budget: 16.00 dB
Switches	SW1: Auto-Negotiation On/Off
	SW2: Pause TX On/Off
	SW3: Link Pass Through On/Off
	SW4: Far End Fault On/Off
Jumper	J3: AutoCross™ enable/disable
Status LEDs	Power: On = connection to external AC power
	SDF or LKF (Signal Detect Fiber or Link Fiber): On = Fiber link detected
	SDC or LKC (Signal Detect Copper or Link Copper): On = Copper link detected
	RXF (Receive Fiber): Flashing = Signal being received on fiber link
	RXC (Receive Copper): Flashing = Signal being received on copper link
Dimensions	Width: 3.0" [76 mm]
	Depth: 4.7" [119 mm]
	Height: 1.0" [25 mm]
Power	External AC/DC required: 12 VDC, 0.5 A, unregulated, standard
Environment	0 – 50°C, 5% – 95% humidity non-condensing, 0 – 10,000 ft. altitude
Shipping Weight	2 lbs. [0.90 kg]
Safety Compliance	Wall Mount Power Supply: UL listed and CSA certified
Regulatory Compliance	FCC Class A, CISPR/EN55022 Class A, EN55024, EN61000, CE Mark
Warranty	Lifetime

Produktinformasjon